300+ TOP ANALOGUE ELECTRONICS Interview Questions and Answers

1. What Is Bias?

The application of electric voltage to a P-N junction is known as Bias.

2. What Is Frequency Modulation?

frequency modulation technique is the frequency of a carrier signal varied according to the amplitude of an information-bearing signal.

Electronic Circuits Interview Questions
3. In A Circuit Consisting Of A Battery In Parallel With Two Identical Parallel Resistors, How Do The Currents Through The Two Resistors Compare?

The same amount of current flows through each resistor.

4. In A Series Circuit Consisting Of A Battery And Two Identical Resistors, How Do The Currents Through The Two Resistors Compare?

The same amount of current flows through each resistor.

Digital Communication Tutorial
5. Which Applications Is A Typical Use For A Transformer?

changing the voltage of an alternating-current signal.

Printed Circuit Board Design (PCB) Interview Questions
6. In What Form Is The Energy Stored In A Charged Capacitor?

The energy is stored as an electric field.

7. Under What Physical Conditions Is Magnetic Energy Stored In An Inductor?

when current is flowing through the inductor.

Digital Signal Processing Tutorial Microwave and Optical link Installation Interview Questions
8. What Does Mosfet Stand For?

Metal-oxide-semiconductor-field-effect-transistor.

9. Which Is True About The Resistance In A “short Circuit?”

A short circuit has very little resistance.

Digital Logic Design Interview Questions
10. Which Components Form A Darlington Pair?

Two bipolar transistors.

11. When A Series Rlc Circuit Is Driven At Resonance, How Does The Impedance Of The Circuit Compare To The Resistance In The Circuit?

The impedance is equal to the resistance.

Digital Communication Interview Questions
12. How Does The Total Capacitance Of Two Capacitors Arranged Together In Parallel Compare To The Individual Capacitances Of Each?

The total capacitance is greater than either of the individual capacitances.

Electronic Circuits Interview Questions
13. How Is The Charge Stored In A Capacitor Related To The Voltage Applied To The Capacitor?

The charge is proportional to the applied voltage.

14. What Is Breakdown Voltage?

The voltage at which a Zener diode starts conducting when reverse biased is called Breakdown Voltage.

15. In An Alternating-current Circuit, What Is The Relationship Between The Impedance Of An Inductor And The Frequency Of The Current?

The impedance increases with frequency.

Digital Signal Processing Interview Questions
16. How Does The Total Capacitance Of Two Capacitors Arranged Together In Series Compare To The Individual Capacitances Of Each?

The total capacitance is less than either of the individual capacitances.

17. Which Statements Is Certainly True About Two Capacitors That Have Been Charged In Parallel?

Each capacitor has the same voltage drop.

Electronic Devices and Circuits Interview Questions
18. In An Alternating-current Circuit, What Is The Relationship Between The Impedance Of A Capacitor And The Frequency Of The Current?

The impedance decreases with frequency.

Printed Circuit Board Design (PCB) Interview Questions
19. What Does A Q-point Of A Transistor Indicate?

The collector-emitter current with no input.

20. What Is The Use Of The Load Line?

Load line is used in the graphical analysis of non-linear circuits.

21. What Is Tri-state Logic?

In digital electronics three-state, tri-state, or 3-state logic allows an output port to assume a high impedance state in addition to the 0 and 1 logic levels, effectively removing the output from the circuit.

22. What Is A Relaxation Oscillator?

In electronics a relaxation oscillator is a nonlinear electronic oscillator circuit that produces a nonsinusoidal repetitive output signal, such as a triangle wave or square wave. The period of the oscillator depends on the time constant of the capacitor or inductor circuit.

23. What Is Noise Margin?

In electrical engineering, noise margin is the amount by which a signal exceeds the minimum amount for proper operation.

It is commonly used in at least two contexts:
In a digital circuit, the noise margin is the amount by which the signal exceeds the threshold for a proper ‘0’ or ‘1’.

24. What Is Characteristic Impedance?

The characteristic impedance or surge impedance (usually written Z0) of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line; that is, a wave travelling in one direction in the absence of reflections in the other direction.

Microwave and Optical link Installation Interview Questions
25. What Is Fan Out?

In digital electronics, the fan-out of a logic gate output is the number of gate inputs it can drive.

In most designs, logic gates are connected to form more complex circuits. While no logic gate input can be fed by more than one output, it is common for one output to be connected to several inputs. The technology used to implement logic gates usually allows a certain number of gate inputs to be wired directly together without additional interfacing circuitry. The maximum fan-out of an output measures its load-driving capability: it is the greatest number of inputs of gates of the same type to which the output can be safely connected.

26. What Is Sample And Hold Circuit?

In electronics, a sample and hold (S/H, also “follow-and-hold”) circuit is an analog device that samples (captures, grabs) the voltage of a continuously varying analog signal and holds (locks, freezes) its value at a constant level for a specified minimum period of time.

27. Define Settling Time Of Op Amp?

Op Amp Settling Time. SETTLING TIME. The settling time of an amplifier is defined as the time it takes the output to respond to a step change of input and come into, and remain within a defined error band, as measured relative to the 50% point of the input pulse.

Digital Logic Design Interview Questions
28. What Is Gain Bandwidth Product?

The gain–bandwidth product (designated as GBWP, GBW, GBP or GB) for an amplifier is the product of the amplifier’s bandwidth and the gain at which the bandwidth is measured.

29. What Is Meta Stability?

Metastability in electronics is the ability of a digital electronics system to persist for an unbounded time in an unstable equilibrium or metastable state. In metastable states, the circuit may be unable to settle into a stable ‘0’ or ‘1’ logic level within the time required for proper circuit operation.

30. What Is Signal Integrity?

Signal integrity or SI is a set of measures of the quality of an electrical signal. In digital electronics, a stream of binary values is represented by a voltage (or current) waveform.

31. What Is Lvdt?

The linear variable differential transformer (LVDT) (also called linear variable displacement transformer, linear variable displacement transducer, or simply differential transformer) is a type of electrical transformer used for measuring linear displacement (position).

Leave a Reply

Your email address will not be published. Required fields are marked *